2-din Frame for Mitsubishi Outlander 1

If you’ve decided to upgrade your Mitsubishi Outlander by installing a 2-DIN head unit or a 2-DIN onboard computer, you will need a custom frame with a larger opening to accommodate it.

Frame Dimensions: 18.2 (18.3) x 10.4 cm

There are two types of frames available depending on the type of climate control in your vehicle:

1) For Vehicles with Climate Control

If your Outlander is equipped with a climate control system, you’ll need a frame designed specifically for that configuration. The original part number for the 2-DIN frame for Mitsubishi Outlander (non-XL model) is:

• Original Part Number: 8002A289HA

2) For Vehicles with Air Conditioning

If your Outlander has a more basic air conditioning system, a different frame is required. The original part number for this frame is:

• Original Part Number: MR590095HA

Important Tip: Before purchasing the frame, make sure to carefully check the photos and compare them with the setup in your vehicle. Many customers mistakenly think they have climate control when in fact their vehicle is equipped with air conditioning, which leads to selecting the wrong frame. So, double-check before buying!

Additional Components: Brackets for Holding the Head Unit

In addition to the frame, you will also need two brackets to securely hold the head unit in place. These brackets are larger than the stock ones currently in your vehicle, so it’s important to purchase them ahead of time to avoid delays.

The original part numbers for the brackets are:

• Right Bracket: MN124401
• Left Bracket: MN124402

Installation Process

Once you have the head unit (whether it’s a navigation system, computer, or stereo), the correct 2-DIN frame, and the brackets, you can proceed with the installation. While you can do the installation yourself, it's a good idea to visit an auto service center for professional assistance.

For a step-by-step guide on how to install it yourself, you can check out this detailed article: 

How to Install a Double-DIN Head Unit

Enjoy the Comfort of Your Upgraded Outlander

Once everything is installed, you’ll be able to enjoy a more modern and functional entertainment system in your vehicle. Whether it's for navigation, music, or connectivity, a new 2-DIN unit will enhance the overall driving experience!

Step-by-Step Guide to Installing a 2-DIN Frame in Your Mitsubishi Outlander

 Follow these steps carefully to install a 2-DIN frame and head unit into your Mitsubishi Outlander:

1. Remove the Lower Panel

Start by gently pulling the lower part of the dashboard panel towards you (refer to the photo for guidance). It should come off without too much force.

2. Disconnect the Connectors

Once the panel is removed, disconnect all electrical connectors from the back of the panel. You can set the panel aside for now.

3. Adjust the Climate Control Knobs

If your vehicle has climate control, position the control knobs vertically and carefully pull them off.

4. Remove the Old Head Unit

Now, remove the existing head unit. It should be secured with screws or brackets. Carefully pull it out from the mounting area.

5. Unscrew the Old Frame

There are two screws that hold the old frame in place. Use a screwdriver to remove them and set them aside.

6. Remove the Old Panel

The old panel is secured with six clips. Carefully pry them loose using a trim tool or your hands, then remove the panel.

7. Remove the Old Bracket

The old bracket that held the head unit in place is secured by four screws. Unscrew these and remove the bracket.

8. Remove the Scales from the Old Panel

If your vehicle has a panel with scales (e.g., a temperature scale for climate control), you'll need to transfer them to the new panel. To do this, carefully heat the scales using a hair dryer to loosen the adhesive. Once heated, use a flat tool or tweezers to gently lift the scales off the old panel.

9. Attach the Scales to the New Panel

Now, take the scales and apply a small amount of adhesive to the back. Carefully place them onto the new 2-DIN panel, ensuring they align perfectly.

10. Install the New Brackets

Take the new brackets (part numbers: MN124401 for the right and MN124402 for the left). Attach the brackets to the sides of the new head unit using screws. Then, secure the mounting plates inside the dash using two screws for each side. You will need a total of 10 M5 screws for this step.

11. Install the New Head Unit

Insert your new 2-DIN head unit into the brackets, ensuring it fits snugly. You may need to adjust the depth using washers to ensure the unit sits flush with the dashboard.

12. Address the Gap (If Necessary)

Depending on the size of your 2-DIN head unit, there may be a small gap between the head unit and the surrounding dashboard. Many 2-DIN units come with a flat frame. If necessary, trim the frame to fit the gap, and if desired, you can paint the frame to match the interior. Use adhesive sealant to secure the frame in place.

---

Final Steps: Once everything is securely in place, reconnect all the wiring, attach the panel back into position, and test the new head unit to make sure everything is working properly.

Enjoy your upgraded Mitsubishi Outlander with a new and modern entertainment system!

Let me know if you'd like any further adjustments!