Installation of Outl XL 3G Door Seals

When it comes to vehicle maintenance and improvements, attention to detail and precision are essential. I decided to write Outl XL 3G rear door seals, they will be useful for those who want to improve the thermal insulation and tightness of their car.

Compatibility and Installation Process

The Outl XL rear door seals are designed as direct replacements for the front door seals from the 16MY models, and they fit seamlessly onto Outl XL 3G as well for rear doors. The installation is relatively straightforward and took approximately 20 minutes, allowing ample time for careful placement. D

Step-by-Step Installation

1. Preparation: Before applying the new seals, it is essential to thoroughly clean the installation area. Make sure to remove any dirt, dust, or debris from the doorframe. A clean surface is crucial for the adhesive to bond properly and ensure a secure fit for the new seals.
2. Degreasing: To further prepare the surface, it’s highly recommended to degrease the area. Use an alcohol-based cloth to wipe down the doorframe, ensuring that all oils or residues are removed. This step is important because even small amounts of oil or grease can prevent the adhesive from sticking properly, potentially compromising the seal’s effectiveness.
3. Sealing: Next, carefully apply the Outl XL seals to the corresponding door frames. The seals are designed to fit precisely, and in most cases, no adjustments will be needed. Once in place, press firmly to ensure the adhesive bonds securely. Even in lower temperatures, the adhesive should perform well, ensuring that the seals stay in position.
4. Final Touch – Heat Application: For added assurance that the seal will stay in place over time, consider using a heat gun or hairdryer to gently warm the seals after installation. This will help the adhesive set more effectively and ensure the seals conform perfectly to the doorframe. Applying heat helps prevent gaps or peeling, providing a longer-lasting, durable seal.

Parts:

• Left Rear Door Seal: 5755A411
• Right Rear Door Seal: 5755A412

Conclusion

Installing the Outl XL seals is a straightforward and efficient process that delivers excellent results, even in less-than-ideal weather conditions. With just a few basic tools and some careful preparation, you can achieve a professional-level installation that will significantly enhance your vehicle’s soundproofing and weather resistance.

By following these steps, you'll be able to create a tight, durable seal that keeps your car comfortable and well-protected from the elements, ensuring a long-lasting solution for both noise reduction and weatherproofing.

Protect Your Suspension Struts: Caps for 2006-2013 Mitsubishi Outlander XL

When it comes to maintaining your vehicle’s suspension system, one crucial yet often overlooked component is the strut dust cover. Many cars, including the 2006-2013 Mitsubishi Outlander XL, come from the factory without these protective caps, leaving the struts exposed to dirt, dust, and debris, which can lead to premature wear and damage.

Luckily, there's a simple solution for this issue: the 4060A136 caps. These soft rubber caps are designed specifically for the front suspension struts of the Mitsubishi Outlander XL, providing a perfect fit to keep contaminants at bay. Here’s why they’re a must-have upgrade for your vehicle:

Why You Need 4060A136 Strut Caps

The struts play an essential role in your vehicle’s suspension system, absorbing shocks and maintaining stability. Without proper protection, dirt, grime, and moisture can infiltrate the strut, potentially leading to corrosion or damage that might affect the performance and longevity of your suspension.

The 4060A136 caps are made from durable, soft rubber that not only fits perfectly on the strut but also offers excellent protection from environmental elements. By installing these caps, you’re safeguarding your suspension system against unnecessary wear and tear, ensuring your Outlander XL runs smoothly for years to come.

Key Features of 4060A136 Strut Caps:

• Perfect fit: These caps are specifically designed for the 2006-2013 Mitsubishi Outlander XL, ensuring they snap right into place on your front suspension struts.
• Durable material: Made from high-quality soft rubber, these caps are flexible yet tough enough to withstand various weather conditions.
• Easy installation: The caps are simple to install and do not require any special tools or modifications to your vehicle.
• Prevents damage: The caps shield your struts from dirt, dust, and debris, reducing the risk of corrosion and extending the life of your suspension system.

Conclusion

If you own a 2006-2013 Mitsubishi Outlander XL and are looking for a way to enhance the longevity and performance of your suspension system, the 4060A136 strut dust covers are an essential addition. They’re easy to install, provide excellent protection, and help keep your vehicle running at its best. Don’t wait until your struts show signs of wear—invest in these protective caps today!

2-din Frame for Mitsubishi Outlander 1

If you’ve decided to upgrade your Mitsubishi Outlander by installing a 2-DIN head unit or a 2-DIN onboard computer, you will need a custom frame with a larger opening to accommodate it.

Frame Dimensions: 18.2 (18.3) x 10.4 cm

There are two types of frames available depending on the type of climate control in your vehicle:

1) For Vehicles with Climate Control

If your Outlander is equipped with a climate control system, you’ll need a frame designed specifically for that configuration. The original part number for the 2-DIN frame for Mitsubishi Outlander (non-XL model) is:

• Original Part Number: 8002A289HA

2) For Vehicles with Air Conditioning

If your Outlander has a more basic air conditioning system, a different frame is required. The original part number for this frame is:

• Original Part Number: MR590095HA

Important Tip: Before purchasing the frame, make sure to carefully check the photos and compare them with the setup in your vehicle. Many customers mistakenly think they have climate control when in fact their vehicle is equipped with air conditioning, which leads to selecting the wrong frame. So, double-check before buying!

Additional Components: Brackets for Holding the Head Unit

In addition to the frame, you will also need two brackets to securely hold the head unit in place. These brackets are larger than the stock ones currently in your vehicle, so it’s important to purchase them ahead of time to avoid delays.

The original part numbers for the brackets are:

• Right Bracket: MN124401
• Left Bracket: MN124402

Installation Process

Once you have the head unit (whether it’s a navigation system, computer, or stereo), the correct 2-DIN frame, and the brackets, you can proceed with the installation. While you can do the installation yourself, it's a good idea to visit an auto service center for professional assistance.

For a step-by-step guide on how to install it yourself, you can check out this detailed article: 

How to Install a Double-DIN Head Unit

Enjoy the Comfort of Your Upgraded Outlander

Once everything is installed, you’ll be able to enjoy a more modern and functional entertainment system in your vehicle. Whether it's for navigation, music, or connectivity, a new 2-DIN unit will enhance the overall driving experience!